Getting Started

From AnalysIR WiKi
Revision as of 05:42, 6 October 2019 by AnalysIR (talk | contribs)
Jump to navigation Jump to search

> KontroLIR Home

Follow this section the first time you get your KontroLIR remote control.


Checklist

  • Make sure you have s SerialUSB adapter which has a pinout for Vcc, GND, Tx, Rx and either DTR or RTS. (Note: some adapters do not have the DTR/RTS pin available, which is required for uploading firmware)
  • Make sure you have a USB cable to use with the serialUSB adapter.
  • Double check your order to establish if you have one or more of the options (EEPROM or dual IR Receivers)
  • If you ordered the SerialUSB adpater, then it will be compatible with KontroLIR.
  • For CP2101 based SerialUSB adapters, drivers can be downloaded from CP2102 Driver download


> KontroLIR Home