KIR Interrupts.ino - Revision history

AnalysIR at 13:23, 16 January 2020

2020-01-16T13:23:18Z

← Older revision		Revision as of 06:23, 16 January 2020
Line 6:		Line 6:
	* ''KIR_enablePCint'' - this function clears any PCINT flags and enables interrupts for the COL pins.		* ''KIR_enablePCint'' - this function clears any PCINT flags and enables interrupts for the COL pins.
	* ''KIR_disablePCint'' - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time directly within the PCINT ISRs.		* ''KIR_disablePCint'' - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time directly within the PCINT ISRs.
	* PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts from the 7 COL pins. Here we record the COL number(1-7), Clear the PCINT flags ~~and disable further~~ PCINT interrupts ~~for now~~.		* PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts from the 7 COL pins. Here we record the COL number(1-7) which will be detected in the Main loop, Clear the PCINT flags. Once the new COL value is detected in the Main Loop, PCINT interrupts will be disabled until the MCU is sent to sleep again.
	* WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.		* WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.

AnalysIR at 18:49, 10 December 2019

2019-12-10T18:49:14Z

← Older revision		Revision as of 11:49, 10 December 2019
Line 8:		Line 8:
	* PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts from the 7 COL pins. Here we record the COL number(1-7), Clear the PCINT flags and disable further PCINT interrupts for now.		* PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts from the 7 COL pins. Here we record the COL number(1-7), Clear the PCINT flags and disable further PCINT interrupts for now.
	* WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.		* WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.

			''Note: Only the PCINT1 & PCINT3 Interrupts are required to cover the 7 Col pins. PCINT0 & PCINT2 are not used.''

AnalysIR at 16:19, 9 October 2019

2019-10-09T16:19:55Z

← Older revision		Revision as of 09:19, 9 October 2019
Line 3:		Line 3:
	This file contains a number of functions for handling interrupts and related items.		This file contains a number of functions for handling interrupts and related items.

	* ''KIR_initPCINT'' - this function initialises the MCU to handle the required ~~PIINTs~~ on the COL pins only. Col pins are set to INPUT_PULLUP and when a button is pressed the COL pin is pulled low, by the respective ROW pin. The resulting interrupt wakes the MCU up from sleep.		* ''KIR_initPCINT'' - this function initialises the MCU to handle the required PCINTs on the COL pins only. Col pins are set to INPUT_PULLUP and when a button is pressed the COL pin is pulled low, by the respective ROW pin. The resulting interrupt wakes the MCU up from sleep.
	* ''KIR_enablePCint'' - this function clears any PCINT flags and enables interrupts for the COL pins.		* ''KIR_enablePCint'' - this function clears any PCINT flags and enables interrupts for the COL pins.
	* ''KIR_disablePCint'' - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time ~~withing~~ the PCINT ISRs.		* ''KIR_disablePCint'' - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time directly within the PCINT ISRs.
	* PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts ~~rom~~ the 7 COL pins. Here we record the COL number(1-7), Clear the PCINT flags ~~anddisable~~ further PCINT interrupts for now.		* PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts from the 7 COL pins. Here we record the COL number(1-7), Clear the PCINT flags and disable further PCINT interrupts for now.
	* WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.		* WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.

AnalysIR at 16:17, 9 October 2019

2019-10-09T16:17:47Z

← Older revision		Revision as of 09:17, 9 October 2019
Line 6:		Line 6:
	* ''KIR_enablePCint'' - this function clears any PCINT flags and enables interrupts for the COL pins.		* ''KIR_enablePCint'' - this function clears any PCINT flags and enables interrupts for the COL pins.
	* ''KIR_disablePCint'' - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time withing the PCINT ISRs.		* ''KIR_disablePCint'' - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time withing the PCINT ISRs.
			* PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts rom the 7 COL pins. Here we record the COL number(1-7), Clear the PCINT flags anddisable further PCINT interrupts for now.
			* WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.

AnalysIR: Created page with "'''''> KontroLIR Home > back''''' This file contains a number of functions for han..."

2019-10-09T16:11:06Z

Created page with "'''''> KontroLIR Home > back''''' This file contains a number of functions for han..."

New page

'''''> [[KontroLIR - Arduino compatible IR remote control|KontroLIR Home]] > [[Customizing the KontroLIR Firmware|back]]'''''

This file contains a number of functions for handling interrupts and related items.

* ''KIR_initPCINT'' - this function initialises the MCU to handle the required PIINTs on the COL pins only. Col pins are set to INPUT_PULLUP and when a button is pressed the COL pin is pulled low, by the respective ROW pin. The resulting interrupt wakes the MCU up from sleep.
* ''KIR_enablePCint'' - this function clears any PCINT flags and enables interrupts for the COL pins.
* ''KIR_disablePCint'' - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time withing the PCINT ISRs.

'''''> [[KontroLIR - Arduino compatible IR remote control|KontroLIR Home]] > [[Customizing the KontroLIR Firmware|back]]'''''