KontroLIR - Arduino compatible IR remote control: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
|||
| (28 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''KontroLIR – 100% Arduino compatible IR remote Control, with optional extras''' | '''KontroLIR – World's first 100% Arduino compatible 45-49 button IR remote Control, with optional extras''' | ||
[[File:KontroLIR photo1.jpg|right|170px|KontroLIR by AnalysIR]] | |||
''' | == Notifications & Updates == | ||
* '''7th Sep 2021''' INFO - In the default Mode 3 signals for a SAMSUNG TV: the LEFTup & LEFTdown codes are incorrect. They should both be changed to 0x59. | |||
* '''20th Jul 2021''' IMPORTANT - Use only version 2.6.1 of IRremote only. | |||
* '''13th Jan 2021''' Firmware V1.0.11 released & available via email on request. | |||
* '''6th Jan 2021''' Do not use IRremote 2.8.0 or 2.8.1 as there is a bug in the library. Use 2.6.1 instead. | |||
* '''4th Jan 2021''' We have a new firmware release available for both KontroLIR & the Test suite. The updates can be requested via email. | |||
== Where To Purchase == | == Where To Purchase == | ||
KontroLIR is available in our store and can be purchased via [https://www.analysir.com/blog/shop | KontroLIR is available in our store and can be purchased via [https://www.analysir.com/blog/shop/ Buy KontroLIR]. | ||
KontroLIR is available as a functional standard unit. In addition, there are several optional add-ons | KontroLIR is available as a functional standard unit. In addition, there are several optional add-ons available: | ||
* Serial USB adapter ''(You can also use your own to upload sketches)'' | * Serial USB adapter ''(You can also use your own to upload sketches)'' | ||
* I2C EEPROM 16KBytes+ ''(There is a | * I2C EEPROM 16KBytes+ ''(There is a significant amount of free FLASH and SRAM available to use, before you need EEPROM)'' | ||
* IR receiver & IR Learner pair ''(only required if you want to use KontroLIR to record signals with | * IR receiver & IR Learner pair ''(only required if you want to use KontroLIR to record signals with AnalysIR or IRremote etc)'' | ||
There is also a fully loaded version available with all add-ons included. | There is also a fully loaded version available with all add-ons included. | ||
| Line 19: | Line 24: | ||
== Applications == | == Applications == | ||
KontroLIR, can be used in many applications, including the following: | KontroLIR, can be used in many applications, including the following: | ||
* A fully customized remote control, using Arduino | * A fully customized remote control, using the Arduino IDE for development and firmware upload. | ||
* Clone an existing collection of remotes, exactly how you want it | * Clone an existing collection of remotes, exactly how you want it | ||
* Restrict usage for certain groups: children, seniors, Hotel Guests, public areas, company equipment. | * Restrict usage for certain groups: children, seniors, Hotel Guests, public areas, company equipment. | ||
* Add custom macros, passwords. | * Add custom macros, passwords. | ||
* Comes with example firmware for 5 devices & | * Comes with example firmware for 5 devices & ~200+ signals, which can be easily expanded with many more devices, signals and macros. | ||
* Combine TV, STB, DVR, Media Center, Lights, Fans, LEDs, Toys, Air Conditioners - all | * Combine TV, STB, DVR, Media Center, Lights, Fans, LEDs, Toys, Air Conditioners, LaserTag - all from the same remote. | ||
* Offer a custom remote as-a-service to 3rd parties. | * Offer a custom remote as-a-service to 3rd parties. | ||
* As a development, prototyping or proof of concept platform for companies designing their own remotes, before committing to a large production run. | * As a development, prototyping or proof of concept platform for companies designing their own remotes, before committing to a large production run. | ||
* As a platform for projects in schools & universities or as a practical Arduino related training aid. | * As a platform for projects in schools & universities or as a practical Arduino related training aid. | ||
* Create your very own learning remote control. | * Create your very own learning remote control. | ||
* Send non-standard IR carrier frequencies, that other remotes cannot handle. | |||
* ...any many more situations | * ...any many more situations | ||
The possibilities are endless. | The possibilities are endless. | ||
== Skills Required == | |||
This should not be your very first Arduino project (unless you are an experienced C programmer). Ideally you will have used IRremote or similar libraries within the Arduino system. You should be familiar with compiling and uploading sketches, installing new Boards and libraries with the desktop Arduino IDE. If you have not done so already, download the Arduino IRremote Library and try out the examples provided with your TV. Once you are happy with your understanding and competency with Arduino and IRremote, order your KontroLIR(s) via our online shop or other affiliates. | |||
== KontroLIR Pin Outs == | == KontroLIR Pin Outs == | ||
| Line 51: | Line 61: | ||
Details are available here: [[Configuring IRremote]] | Details are available here: [[Configuring IRremote]] | ||
== Customizing the Firmware == | == Customizing the KontroLIR Firmware == | ||
Details are available here: [[Customizing the Firmware]] | Details are available here: [[Customizing the KontroLIR Firmware]] | ||
== Low Power Configuration == | == Low Power Configuration == | ||
| Line 63: | Line 73: | ||
If you need additional support please open a new issue in our [https://irforum.analysir.com/ IRforum] - under '''Products:Support Requests'''. | If you need additional support please open a new issue in our [https://irforum.analysir.com/ IRforum] - under '''Products:Support Requests'''. | ||
== | You can also use our IRforum for general discussion about KontroLIR and related topics. | ||
If you | |||
== KontroLIR Release Notes == | |||
Details are available here: [[KontroLIR Release Notes]] | |||
== Opening the Enclosure == | |||
The enclosure of KontroLIR is '''not designed for opening''' by users, other than for replacing batteries and uploading firmware via the battery compartment over SerialUSB. | |||
When we open the enclosure we use a tool called a spudger and employ lots of TLC to avoid any damage to the hard plastic case. | |||
If you decide to open the case beyond the battery compartment, you do so at your own risk. | |||
Advanced users may decide to go ahead and open the enclosure, to gain access to the ICSP programming header or the I2C headers etc, or even just to have a look at the PCB. | |||
This does not come under standard support, but we are happy to assist where possible (at your own risk, in case of damage to the enclosure) | |||
Some things to note: | |||
* The battery clips/terminals attached to the PCB can be delicate and must be carefully re-inserted into the retaining slots when re-assembling the case. | |||
* If you do damage the plastic case, it should be possible to use glue or similar to restore it. | |||
* Be extra careful not to scratch the edges as this can result in an uncomfortable feeling or touch when holding the remote. | |||
* If you do, it should be possible to pare off or sand any jagged edges you created. | |||
* If all of this doesn't make sense, then you have likely not tried this before with remote controls. They can be a challenge to open without the right tools. | |||
''We expect to have a supply of quality spudgers stocked in our shop soon, if not already there.'' | |||
== Copyright & Open Source MIT License== | |||
See here for [[copyright and license information]]. | |||
== More Information == | == More Information == | ||
Latest revision as of 07:24, 7 September 2021
KontroLIR – World's first 100% Arduino compatible 45-49 button IR remote Control, with optional extras
Notifications & Updates
- 7th Sep 2021 INFO - In the default Mode 3 signals for a SAMSUNG TV: the LEFTup & LEFTdown codes are incorrect. They should both be changed to 0x59.
- 20th Jul 2021 IMPORTANT - Use only version 2.6.1 of IRremote only.
- 13th Jan 2021 Firmware V1.0.11 released & available via email on request.
- 6th Jan 2021 Do not use IRremote 2.8.0 or 2.8.1 as there is a bug in the library. Use 2.6.1 instead.
- 4th Jan 2021 We have a new firmware release available for both KontroLIR & the Test suite. The updates can be requested via email.
Where To Purchase
KontroLIR is available in our store and can be purchased via Buy KontroLIR.
KontroLIR is available as a functional standard unit. In addition, there are several optional add-ons available:
- Serial USB adapter (You can also use your own to upload sketches)
- I2C EEPROM 16KBytes+ (There is a significant amount of free FLASH and SRAM available to use, before you need EEPROM)
- IR receiver & IR Learner pair (only required if you want to use KontroLIR to record signals with AnalysIR or IRremote etc)
There is also a fully loaded version available with all add-ons included.
Data Sheet
The KontroLIR data sheet can be found by clicking here
Applications
KontroLIR, can be used in many applications, including the following:
- A fully customized remote control, using the Arduino IDE for development and firmware upload.
- Clone an existing collection of remotes, exactly how you want it
- Restrict usage for certain groups: children, seniors, Hotel Guests, public areas, company equipment.
- Add custom macros, passwords.
- Comes with example firmware for 5 devices & ~200+ signals, which can be easily expanded with many more devices, signals and macros.
- Combine TV, STB, DVR, Media Center, Lights, Fans, LEDs, Toys, Air Conditioners, LaserTag - all from the same remote.
- Offer a custom remote as-a-service to 3rd parties.
- As a development, prototyping or proof of concept platform for companies designing their own remotes, before committing to a large production run.
- As a platform for projects in schools & universities or as a practical Arduino related training aid.
- Create your very own learning remote control.
- Send non-standard IR carrier frequencies, that other remotes cannot handle.
- ...any many more situations
The possibilities are endless.
Skills Required
This should not be your very first Arduino project (unless you are an experienced C programmer). Ideally you will have used IRremote or similar libraries within the Arduino system. You should be familiar with compiling and uploading sketches, installing new Boards and libraries with the desktop Arduino IDE. If you have not done so already, download the Arduino IRremote Library and try out the examples provided with your TV. Once you are happy with your understanding and competency with Arduino and IRremote, order your KontroLIR(s) via our online shop or other affiliates.
KontroLIR Pin Outs
Details of pin-outs are available here: KontroLIR Pin Outs
Oscillator Clock Rate Selection
Details are available here: Oscillator Clock Rate
Getting Started
Details are available here: Getting Started
Uploading the KontroLIR Firmware
Details are available here: Uploading the KontroLIR Firmware
Configuring IRremote for use with KontroLIR
Details are available here: Configuring IRremote
Customizing the KontroLIR Firmware
Details are available here: Customizing the KontroLIR Firmware
Low Power Configuration
Details are available here: Low Power Configuration
Using KontroLIR with AnalysIR
Details are available here: Use with AnalysIR
Getting Support
If you need additional support please open a new issue in our IRforum - under Products:Support Requests.
You can also use our IRforum for general discussion about KontroLIR and related topics.
KontroLIR Release Notes
Details are available here: KontroLIR Release Notes
Opening the Enclosure
The enclosure of KontroLIR is not designed for opening by users, other than for replacing batteries and uploading firmware via the battery compartment over SerialUSB.
When we open the enclosure we use a tool called a spudger and employ lots of TLC to avoid any damage to the hard plastic case. If you decide to open the case beyond the battery compartment, you do so at your own risk.
Advanced users may decide to go ahead and open the enclosure, to gain access to the ICSP programming header or the I2C headers etc, or even just to have a look at the PCB. This does not come under standard support, but we are happy to assist where possible (at your own risk, in case of damage to the enclosure)
Some things to note:
- The battery clips/terminals attached to the PCB can be delicate and must be carefully re-inserted into the retaining slots when re-assembling the case.
- If you do damage the plastic case, it should be possible to use glue or similar to restore it.
- Be extra careful not to scratch the edges as this can result in an uncomfortable feeling or touch when holding the remote.
- If you do, it should be possible to pare off or sand any jagged edges you created.
- If all of this doesn't make sense, then you have likely not tried this before with remote controls. They can be a challenge to open without the right tools.
We expect to have a supply of quality spudgers stocked in our shop soon, if not already there.
Copyright & Open Source MIT License
See here for copyright and license information.
More Information
If...
- There is a topic not covered here or
- You would like us to add some more information or
- You have a tip to add or
- you have noticed a mistake
then let us know via the contact page