KIR Interrupts.ino: Difference between revisions

Revision as of 08:17, 9 October 2019

This file contains a number of functions for handling interrupts and related items.

KIR_initPCINT - this function initialises the MCU to handle the required PIINTs on the COL pins only. Col pins are set to INPUT_PULLUP and when a button is pressed the COL pin is pulled low, by the respective ROW pin. The resulting interrupt wakes the MCU up from sleep.
KIR_enablePCint - this function clears any PCINT flags and enables interrupts for the COL pins.
KIR_disablePCint - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time withing the PCINT ISRs.
PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts rom the 7 COL pins. Here we record the COL number(1-7), Clear the PCINT flags anddisable further PCINT interrupts for now.
WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.

@@ Line 6: / Line 6: @@
 * ''KIR_enablePCint'' - this function clears any PCINT flags and enables interrupts for the COL pins.
 * ''KIR_disablePCint'' - this function clears any PCINT flags and disables interrupts for the COL pins. However, we do not use/call this function and simply disable PCINT every time withing the PCINT ISRs.
+* PCINT ISRs - We need to use 2 PCINT ISR vectors to handle interrupts rom the 7 COL pins. Here we record the COL number(1-7), Clear the PCINT flags anddisable further PCINT interrupts for now.
+* WDT_ISR - not used, but as a precaution we simply disable WDT interrupts if ever called.