Getting Started

Follow this section the first time you get your KontroLIR remote control.

Checklist

Make sure you have s SerialUSB adapter which has a pinout for Vcc, GND, Tx, Rx and either DTR or RTS. (Note: some adapters do not have the DTR/RTS pin available, which is required for uploading firmware)
Make sure you have a USB cable to use with the serialUSB adapter.
Double check your order to establish if you have one or more of the options (EEPROM or dual IR Receivers)
If you ordered the SerialUSB adpater, then it will be compatible with KontroLIR.
For CP2101 based SerialUSB adapters, drivers can be downloaded from CP2102 Driver download