Getting Started: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
'''''[[KontroLIR - Arduino compatible IR remote control|> KontroLIR Home]]''''' | '''''[[KontroLIR - Arduino compatible IR remote control|> KontroLIR Home]]''''' | ||
... | Follow this section the first time you get your KontroLIR remote control. | ||
== Checklist == | |||
* Make sure you have s SerialUSB adapter which has a pinout for Vcc, GND, Tx, Rx and either DTR or RTS. ''(Note: some adapters do not have the DTR/RTS pin available, which is required for uploading firmware)'' | |||
* Make sure you have a USB cable to use with the serialUSB adapter. | |||
* Double check your order to establish if you have one or more of the options (EEPROM or dual IR Receivers) | |||
* If you ordered the SerialUSB adpater, then it will be compatible with KontroLIR. | |||
* For CP2101 based SerialUSB adapters, drivers can be downloaded from [https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers CP2102 Driver download] | |||
'''''[[KontroLIR - Arduino compatible IR remote control|> KontroLIR Home]]''''' | '''''[[KontroLIR - Arduino compatible IR remote control|> KontroLIR Home]]''''' | ||
Revision as of 05:42, 6 October 2019
Follow this section the first time you get your KontroLIR remote control.
Checklist
- Make sure you have s SerialUSB adapter which has a pinout for Vcc, GND, Tx, Rx and either DTR or RTS. (Note: some adapters do not have the DTR/RTS pin available, which is required for uploading firmware)
- Make sure you have a USB cable to use with the serialUSB adapter.
- Double check your order to establish if you have one or more of the options (EEPROM or dual IR Receivers)
- If you ordered the SerialUSB adpater, then it will be compatible with KontroLIR.
- For CP2101 based SerialUSB adapters, drivers can be downloaded from CP2102 Driver download