Customizing the KontroLIR Firmware: Difference between revisions
(Created page with "'''''> KontroLIR Home''''' We explore this topic of "customizing KontroLIR Firmware" by going through each firmware file...") |
|||
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''''[[KontroLIR - Arduino compatible IR remote control|> KontroLIR Home]]''''' | '''''[[KontroLIR - Arduino compatible IR remote control|> KontroLIR Home]]''''' | ||
__TOC__ | |||
We explore this topic of "customizing KontroLIR Firmware" by going through each firmware file individually | We explore this topic of "customizing KontroLIR Firmware" by going through each firmware file individually | ||
== Default Firmware Resource usage == | |||
The default reference firmware uses only a fraction of FLASH(~25%) & SRAM(~35%), leaving ample resources to extend the number of devices, signals and features. The output of the Arduino IDE is shown below, for reference. | |||
''<q>Sketch uses 8278 bytes (25%) of program storage space. Maximum is 32256 bytes. Global variables use 727 bytes (35%) of dynamic memory, leaving 1321 bytes for local variables. Maximum is 2048 bytes.</q>'' | |||
Note: The above information is based on the initial pre-release version and is subject to variation over time. | |||
== KIR == | |||
KIR is used throughout the firmware source code and is short for KontroLIR. | |||
== KontroLIR Firmware == | |||
| Line 35: | Line 52: | ||
[[KIR_Vars.h]] - all '''non'''-local variables are defined here | [[KIR_Vars.h]] - all '''non'''-local variables are defined here | ||
[[KIR_Macros.ino]] - all macros are defined here | |||
[[NOTES.ino]] - A collection of misc. placeholder notes for internal use only | [[NOTES.ino]] - A collection of misc. placeholder notes for internal use only | ||
| Line 40: | Line 59: | ||
The files above represent the KontroLIR reference firmware. You will have to modify some of these to configure your own KontroLIR remote. A copy of the firmware source is provided with your order. | The files above represent the KontroLIR reference firmware. You will have to modify some of these to configure your own KontroLIR remote. A copy of the firmware source is provided with your order. | ||
== KontroLIR Macros == | |||
[[KontroLIR Macros]] - information about adding IR macros to KontroLIR | |||
'''''[[KontroLIR - Arduino compatible IR remote control|> KontroLIR Home]]''''' | '''''[[KontroLIR - Arduino compatible IR remote control|> KontroLIR Home]]''''' | ||
Latest revision as of 07:58, 10 December 2019
We explore this topic of "customizing KontroLIR Firmware" by going through each firmware file individually
Default Firmware Resource usage
The default reference firmware uses only a fraction of FLASH(~25%) & SRAM(~35%), leaving ample resources to extend the number of devices, signals and features. The output of the Arduino IDE is shown below, for reference.
Sketch uses 8278 bytes (25%) of program storage space. Maximum is 32256 bytes. Global variables use 727 bytes (35%) of dynamic memory, leaving 1321 bytes for local variables. Maximum is 2048 bytes.
Note: The above information is based on the initial pre-release version and is subject to variation over time.
KIR
KIR is used throughout the firmware source code and is short for KontroLIR.
KontroLIR Firmware
KontrolIR_V1.00.ino - The main Arduino sketch file
KIR_buttons.ino - functions related to KontrolIR buttons
KIR_Copyright.h - Copyright and Licence Information (applies to all code)
KIR_extEEPROM.ino - functions related to (optional) external I2C EEPROM
KIR_header.h - KontroLIR definitions and macros
KIR_Infrared_Tx.ino - functions related to IR signal sending
KIR_Interrupts.ino - functions related to Pin Change and other Interrupts
KIR_IRremote.ino - functions related to any future IRremote modifications/workarounds
KIR_Misc_Functions.ino - a bundle of general KontroLIR system functions
KIR_Mode1_Functions.ino - Mode1 button / function mapping
KIR_Mode2_Functions.ino - Mode2 button / function mapping
KIR_Mode3_Functions.ino - Mode3 button / function mapping
KIR_Mode4_Functions.ino - Mode4 button / function mapping
KIR_Mode5_Functions.ino - Mode5 button / function mapping
KIR_RAW_Signals.h - Definition of Flash based RAW signals used
KIR_Vars.h - all non-local variables are defined here
KIR_Macros.ino - all macros are defined here
NOTES.ino - A collection of misc. placeholder notes for internal use only
The files above represent the KontroLIR reference firmware. You will have to modify some of these to configure your own KontroLIR remote. A copy of the firmware source is provided with your order.
KontroLIR Macros
KontroLIR Macros - information about adding IR macros to KontroLIR